Los 10 Garden Hose Pump Inlet

The General Pump 100651 is a DuraView Inlet Filter Integrated Garden Hose Nut. Its operating gpm is 8.0 and its Max psi is 150. This model is the strongest see-through filter on the market. Some features it includes is: loadbearing brass spine; integrated garden hose connector; flow through design; clear plastic cover; available with or without bypass ports; for general purpose pressure wash use.

• Maximum 80 psi garden hose pressure
• Maximum Temperature: 140° F
• For Garden Hose or Pressure Washer Use
• 3/4 in. Male Inlet x 3/4 in. Female Outlet
• 2pcs of Extra gaskets included.A material used to prevent leakage or seepage, as around a pipe joint
• Package Includes:
  1 x water hose sediment filter with 100 mesh screen
  1 x big Oring / gasket for Cup
  1 x small Orings for Coupler connection
  1 x Manual Instructions

• User Instructions:
  1.Connect one side of the filter attachment to the water inlet on your pressure washer OR to an outdoor water faucet
  2.Connect garden hose to opposite side of attachement
  3.always disconnect when finished use
  4.Do not leave attachement unattended or under pressure when not in use

  Cleaning and Storing the Filter
  1.Reduced water flow may indicate that the filter need to be cleaned.To clean the filter,turn off pressure and ensure hose is not under pressure
  2.Before storing,rinse and remove any residue and or other materials.Allow to completely dry before re-assembly and storage of item
  3.Sotre in a dry location where filter will be protected from debris to prevent excessive clogging of filter.

80 PSI 3/4″ Male Inlet x 3/4″ Female Outlet 40 Mesh Max Temp: 140° F

Easy To Connect – Filters Water Running From Spigot to Garden Hose To Protect Pressure Washer Pump

Suitable For Use With Most Pressure Washers

Easy To Clean

Connects to standard garden hose, home water spigot or pressure washer inlet

Permanent mesh screen filter does not need to be replaced and cleans easily

Durable metal couplers

It belongs to high pressure washer accessory

Connect one side of the filter attachment to the water inlet on your pressure washer or to an outdoor water faucet

Connect garden hose to opposite side of attachment

Always disconnect when finished

Do not leave attachment unattended or under pressure when not in use

Reduced water flow may indicate that the filter needs to be cleaned. To clean the filter, turn off pressure washer and ensure hose is not under pressure. Unscrew the filter head from the container and flush the screen with water. Repeat process if needed

Before storing, rinse and remove any residue and or other materials. Allow to completely dry before re-assembly and storage of item.

Store in a dry location where filter will be protected from debris to prevent excessive clogging of filter.

Specifications:
Material: ABS
Power consumption:19w
Working voltage: 12VDC
Rated current: 1.5V
Max flow rate: 800L/H(210GPH)
Max lift height: 5m (16ft)
Diameter of inlet: 0.5 inch
Diameter of outlet: 0.5 inch
Noise: <>
Waterproof level: IP68
Lifespan: More than 30,000hrs
Working temperature: 0? – 60?/(32°F – 140°F)
Item dimension: 77*66*49mm
Weight: 220g(7.8ounces)
Power Cord:46cm(18″)

Note:
1. Working at rated voltage (DC12V/1.5A ). The positive pole is red wire, the negative pole is black wire. Excessive voltage and current will affect the life of the pump.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation.
3. Preventing any hard particles entering the pumps.
4. When blocking, long-running is not allowed.

How to choose pump:
Working environment (temperature and medium)
Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet)
Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump.

Package includes:
1 * Water pump

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

Amazon.com

The Superior Pump 1/4-Horsepower Submersible Utility Pump offers exceptional power in a small, durable frame. Able to pump 30 gallons a minute up to 25 feet of vertical height, this tough submersible pump features durable thermoplastic construction and a compact design that can fit inside a 6-inch opening. Designed to drain standing water from any enclosed environment, the Superior Pump is ideal for flooded basements, farm use, and typical residential or commercial water transfer applications. An optional float switch can be added to allow this model to be used as a sump pump.

1/4-Horsepower Submersible Utility Pump At a Glance Powerful, 1/4-horsepower, continuous-duty split capacitor motor Efficient pump is capable of pumping up to 30 gallons a minute Can lift water up to 25 feet vertically for versatile use Durable, corrosion-resistant thermoplastic construction Backed by a one-year limited warranty

Click here to see the cutaway view.

Continuous duty motor can pump up to 30 gallons a minute and lift water up to 25 feet vertically. View Larger.

Performance Chart View Larger.

Designed for Consistent, Reliable Domestic Use
Ideal for draining standing water from swimming pools, fountains, and flooded basements, the Superior Pump can move up to 30 gallons a minute, whisking away water to an 1/8-inch to the ground. Fully submersible, the Superior Pump features a 10-foot, replaceable, waterproof power cord, and is able to lift water up to 25 feet vertically. It’s equipped with a large 1-1/4-inch male iron pipe discharge thread for high capacity pumping, and includes a garden hose adapter for your convenience. With the addition of an optional float switch, the Superior Pump can also be used as a sump pump.

Continuous-Duty Motor Powers Through Tough Jobs
The Superior Pump showcases a continuous-duty, split capacitor motor for optimal performance. Thermally protected, this high-efficiency, 3.8-amp, 1/4-horsepower motor delivers the power necessary for any tough job.

Rugged, Compact Design for Durability
Durable thermoplastic construction ensures this submersible pump can be used time and again without corroding. With a sleek, compact design, the Superior Pump can fit inside an opening as small as 6 inches. Water intakes on the side and bottom of the pump allow for continuous pumping with clog-resistant suction.

Product and Warranty Information
This pump is UL/CUL listed and CSA certified for safety and dependability.

The Superior Pump Submersible Utility Pump is backed by a one-year limited warranty.

What’s in the Box
Utility pump, hose adapter, and user manual.

Choose the right thermoplastic pump for you:
	91025	91250	91330	92250	92330	92333
Horsepower	1/5 hp	1/4 hp	1/3 hp	1/4 hp	1/3 hp	1/3 hp
Amps	3.6	3.8	4.1	3.8	4.1	2.76
Gallons Per Minute	25 GPM	30 GPM	40 GPM	30 GPM	30 GPM	50 GPM
Discharge Size	1-1/4 inches	1-1/4 inches	1-1/4 inches	1-1/4 inches – 1-1/2 inches	1-1/4 inches – 1-1/2 inches	1-1/4 inches
Discharge Type	Top	Top	Top	Top	Top
Switch Type		Tethered		Tethered	Tethered

See all Product description

This General Pump Brass Pressure Washer Garden Hose Adapter is a low pressure fitting complete with a stainless steel tension spring and inlet stainless steel filter washer. Max. PSI: 200, Material: Brass, Female Inlet (in.): 3/4″ Garden Hose;Male Outlet:1/2″ NPT-M